No spam, just the best from the world of Flos and design, we promise.

Filter by designers
Filter by families

Colors (6)


LED - 3000K - CRI 80 - BEAM 52

New Item Code: F010A30H006

Wall-mounted outdoor footpath lights with LED light source and flared head that can be adjusted vertically 350º. The body is made of die-cast aluminium with low copper content.
Available in different finishes with a double layer of powder coating according to the QUALICOAT standard. The first layer of epoxy powder confers chemical and mechanical resistance. The second layer, a polyester powder finish, ensures resistance to UV rays and corrosive atmospheric agents. The painted surfaces are treated with alkiline and acid washes, rinsed with demineralized water, and subjected to chemical conversion treatment to protect against rust.
The anchoring hardware is made of AISI 316L stainless steel.
Diffuser in micro-textured glass to guarantee uniform light distribution on the ground.
The 24-V electrical power supply can be installed remotely. For easier installation, an optional box (sold separately) is available (3-module junction box, model 503).
LED light source included. Head adjustable 350º on the vertical axis. Remote 24-V electrical power unit sold separately. Unit comes with two 200-mm-long outgoing power cables and a kit for IP-rated connection. The power supply may be installed remotely (installation box not necessary) or housed behind the unit with the optional installation box.

Also available in: Wallstick
Technical drawing
Schematic light drawing
  • Y
  • EXTIP10
  • IK04
  • CM10
  • OTYPE6
  • IC3
Main specifications
  • Lamp category: LED
  • Power (W): 2.5
  • CCT (K): 3000K
  • CRI: 80
  • Net lumen (lm): 199
  • Mountings: Wall
  • Environment: Outdoor wet location
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Flood
  • Beam angle (°): 52
  • Beam angle C90-270 (°): 52
  • Frequency (Hz): 50-60
  • Voltage (V): 24
  • Dimmable: Yes
  • Driver: Remote excluded
  • Driver type: Dimmable DALI PWM, Dimmable 1-10 PWM
  • Emergency: Without
  • Insulation class: III
  • Color: Grey
  • Orientation: Adjustable
  • Weight (kg): 0.3
  • Rotation (°): 350

We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment