No spam, just the best from the world of Flos and design, we promise.

Filter by designers
Filter by families

Colors (6)

Walkstick Pipe 1 H 600 mm Dimmable 1-10V

LED - 2700K - CRI 80 - BEAM 97

New Item Code: F010H21B012

Collection of outdoor poles with LED light source and tubular head that can be adjusted 350º on the vertical and horizontal axes. Available in two different heights.
The stem and head are made of extruded aluminium; the base is made of die-cast aluminium with low copper content.
Available in different finishes with a double layer of powder coating according to the QUALICOAT standard. The first layer of epoxy powder confers chemical and mechanical resistance. The second layer, a polyester powder finish, ensures resistance to UV rays and corrosive atmospheric agents. The painted surfaces are treated with alkiline and acid washes, rinsed with demineralized water, and subjected to chemical conversion treatment to protect against rust.
The anchoring hardware is made of AISI 316L stainless steel.
Diffuser made of acid-etched glass to guarantee a uniform wash of light on the ground.
The unit is supplied with a length of neoprene cable.
The unit may be easily installed on any flooring on the ground with anchors, or with the dedicated installation box to completely integrate the base of the product with the pavement.
220-240V power supply included. Ready for installation on solid surface. Box for ground installation to be ordered separately.
Included 2 way terminal block 4 poles IP68 H2O Stop.
Version 110V upon request.

Also available in: Walkstick Pipe
Technical drawing
Schematic light drawing
Diffused light
  • Y
  • EXTIP6
  • IK08
  • CM10
  • OTYPE1
  • IC2
Main specifications
  • Lamp category: LED
  • Power (W): 7
  • CCT (K): 2700K
  • CRI: 80
  • Net lumen (lm): 483
  • Mountings: Ground
  • Environment: Outdoor wet location
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Asymmetric
  • Optical type: Diffused light
  • Beam angle (°): 97
  • Beam angle C90-270 (°): 97
  • Frequency (Hz): 50-60
  • Voltage (V): 220-240
  • Dimmable: Yes
  • Driver: Integrated
  • Driver type: Dimmable 1-10V
  • Emergency: Without
  • Insulation class: II
  • Color: Forest Green
  • Orientation: Adjustable
  • Weight (kg): 1.05
  • Rotation (°): 350

We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment