Adjustable projector for installation on ceiling, wall or floor.
Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content) and AISI 316L stainless steel fixing bracket. Glass diffuser: extra clear with silkscreen border, fixed through a robotic gluing system. The luminaire has three connected parts: wiring unit (silicone gasket), heat sink and emitting unit (silicone glue). A graduated fixing plate allows a precise adjustment of the emitting unit.
Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
Protection rating: IP66
In compliance with EN60598-1 standards
Class of insulation: I
Installation: the luminaire is equipped with 1000mm of cable for an easy-to-make connection.
We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.
Schematic light drawing
- Power (W): 9
- System power (W): 12
- CCT (K): 4000K
- CRI: 80
- Net lumen (lm): 778
- Mountings: Ceiling, Ground, Wall surface
- Environment: Outdoor wet location
- Lighting type: Direct
- LED type: LED array
- Light distribution: Symmetric
- Optical type: Flood
- Frequency (Hz): 50-60
- Voltage (V): 220-240
- Dimmable: No
- Driver type: Non Dimmable
- Emergency: Without
- Insulation class: I
- Color: Black
Notes: Dimmable version on request
Visor Spock 75
- Item Code: 205.4
Flood Diffuser Spock 75
- Item Code: 208.4
Anti-Glare Louvre Spock 75
- Item Code: 211.4
Kit Ground Spikes Spock 75/Spock 95/Spock 130
- Item Code: 203
3/4 Way Terminal Block 4 Poles Ip68 H2O Stop
- Item Code: 215
2 Way Terminal Block 4 Poles Ip68 H2O Stop
- Item Code: 236
SPD (Surge Protection Device)
- Item Code: 237
Elliptical Lens Spock 75
- Item Code: 261.4