Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
FLOS-SANDRO-H500-500X500
SANDRO-BOLLARD-OUTDOOR-FLOS-GALLERY-258X258-1

Colors (2)

Sandro h 500 mm

2700K - CRI 80

Item Code: 502009.18

Bollard light
Configuration: extruded aluminium structure. Polycarbonate diffuser: satin UV-stabilised.
Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
Protection rating: IP65
In compliance with EN 60598-1 standards
Class of insulation: II
Installation: the luminaire is equipped with a piece of cable and a wiring kit with crimp connectors and an adhesive heat-shrink tubing for a watertight electrical connection. The use of a corrugated tube (Ø 30-50mm) allows an easier connection to the line. We recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately). Outdoor use requires suitable flexible cables.
We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.

Also available in: Sandro
Technical drawing
Schematic light drawing
Diffused light
  • EXTIP6
  • OTYPE1
  • IC2
Main specifications
  • Power (W): 5.5
  • System power (W): 8
  • CCT (K): 2700K
  • CRI: 80
  • Net lumen (lm): 299
  • Mountings: Pole
  • Environment: Outdoor wet location
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Asymmetric
  • Optical type: Diffused light
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 100-240
  • Dimmable: No
  • Driver type: Non Dimmable
  • Emergency: Without
  • Insulation class: II
Physical
  • Color: Deep Brown

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment