Outdoor recessed wall-mounted luminaire with LED light source.
Body made of AISI 316L stainless steel treated with the PVD process (Physical Vapour Deposition). With this innovative treatment, after the surface is polished or brushed according to the choice of finish, the surfaces of the Real Matter are coated with a thin film of metals such as zirconium and titanium. Combining with the steel at the molecular level, these increase the resistance to both mechanical and atmospheric agents, allowing elegant, durable finishes to be created.
UV-stabilized polycarbonate diffuser.
Remote 24-V power supply sold separately.
The fixture is supplied with a 200-mm cable and IP connection kit.
Box-free installation on masonry or concrete. The fixture is glued directly onto the surface (glue chosen by the installer depending on the surface material).
Schematic light drawing
- Lamp category: LED
- Power (W): 3
- CCT (K): 2700K
- CRI: 80
- Net lumen (lm): 74
- Mountings: Wall surface
- Environment: Outdoor wet location
- Lighting type: Direct
- LED type: Power LED
- Light distribution: Asymmetric
- Optical type: Asymmetric
- Beam angle (°): 80
- Beam angle C90-270 (°): 30
- Frequency (Hz): 50-60
- Voltage (V): 24
- Dimmable: Yes
- Driver: Remote excluded
- Driver type: Non Dimmable, Dimmable 1-10V, Dimmable DALI 1
- Emergency: Without
- Insulation class: III
- Color: Brushed Gold
- Orientation: Fixed
- Weight (kg): 0.60
Notes: We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the coating. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
Power supply 24Vdc 50W / 120-240V IP67 Class II selv. Non Dimmable
- Item Code: RF25755
Power supply 24Vdc 100W / 120-240V IP67 Class II selv.Non Dimmable
- Item Code: RF25756
Power supply 24Vdc 70W / 220-240V IP67 Class II selv. Non Dimmable
- Item Code: RF25749
Power supply 24Vdc 17W / 110-240V (15W@110V) IP20 Class II selv. Dimmable 1-10V
- Item Code: RF25750
Power supply 24Vdc 20W / 110-240Vdc (15W@110V) IP67 Class II selv. Dimmable DALI
- Item Code: RF26387
Power supply 24Vdc 20W / 220- 240V IP67 Class II selv. Non Dimmable
- Item Code: RF25752
Power supply 24V 10W /110-240V IP20 Class II selv. Non Dimmable
- Item Code: RF25747
Power supply 24V 8W / 110-240V IP65 Class II selv. Non Dimmable
- Item Code: RF25748