Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
FLOS-MARCO-UNIDIRECT-WIDE-500X500
MARCO-WALL-OUTDOOR-FLOS-GALLERY-258X258-1
MARCO-WALL-OUTDOOR-FLOS-GALLERY-258X258-2
MARCO-WALL-OUTDOOR-FLOS-GALLERY-258X258-3

Colors (2)

Marco Unidirectional

3000K - CRI 80

Item Code: 10711650.12

Luminaire for installation on wall – surface mounted.
Configuration: die-cast aluminium structure, EN AB-47100 alloy (low copper content) and AISI 304 stainless steel fixing plate. Glass diffuser: transparent with silkscreen border, fixed to the aluminium structure through a robotic gluing system.
Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders that are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components that have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
Protection rating: IP65
In compliance with EN 60598-1 standards
Class of insulation: II
Installation: wiring through two rubber cable glands (5mm<Ø<9mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection.

Also available in: Marco
Technical drawing
Schematic light drawing
Flood
  • EXTIP6
  • OTYPE6
  • IC2
Main specifications
  • Power (W): 1.1
  • System power (W): 3
  • CCT (K): 3000K
  • CRI: 80
  • Net lumen (lm): 97
  • Mountings: Wall surface
  • Environment: Outdoor wet location
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Flood
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 100-240
  • Dimmable: No
  • Driver type: Non Dimmable
  • Emergency: Without
  • Insulation class: II
Physical
  • Color: Forest Green

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment