No spam, just the best from the world of Flos and design, we promise.

Filter by designers
Filter by families

Colors (6)

Landlord Soft PWM Dimmable Deep Brown

LED - 3000K - CRI 80 - BEAM 51

Item Code: F004C30A018

IP65 projector for external use, designed to offer diffuse lighting.
It is characterized by an aluminium disk shape head, orientable up to 20º beam and lockable in position, to be powered at 24V, and available in 2700K, 3000K and 4000K colour temperature.
It is the perfect tool to light bushes, flowerbed and transit areas with an homogenous diffuse light beam.
Landlord Soft can be installed on solid ground spikes, with the possibility of an optional picket.
20º adjustable head for installation on ground poles.
Poles to be ordered as separated accessories.
24V remote power supply to be ordered separately.
Each head comes with a 2000 mm lenght outgoing cable and a wiring kit.

Also available in: Landlord
Technical drawing
  • Y
  • EXTIP6
  • IK07
  • CM10
  • OTYPE1
  • IC3
Main specifications
  • Lamp category: LED
  • Power (W): 5
  • CCT (K): 3000K
  • CRI: 80
  • Net lumen (lm): 252
  • Mountings: Ground
  • Environment: Outdoor wet location
  • Lighting type: Direct
  • LED type: Top LED
  • Light distribution: Symmetric
  • Optical type: Diffused light
  • Beam angle (°): 51
  • Beam angle C90-270 (°): 51
  • Frequency (Hz): 50-60
  • Voltage (V): 24
  • Dimmable: Yes
  • Driver: Remote excluded
  • Driver type: Dimmable DALI PWM, Dimmable 1-10 PWM
  • Emergency: Without
  • Insulation class: III
  • Color: Deep Brown
  • Orientation: Adjustable
  • Weight (kg): 0.40
  • Rotation (°): 359

During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment