The body of Klein Pro bollard is made of extruded aluminium, base and diffuser in die-cast aluminium EN AB-47100 with a low copper content.
High-resistance coating: the external coating is applied with a double layer with epoxy powders according to the QUALICOAT standard. The first layer of epoxy powder gives chemical and mechanical resistance, the second finishing layer of polyester powder ensures resistance.
Also available in anodized finishes.
Klein Pro is compatible with existing “Klein” fixing plate.
220-240V power supply integrated. Solid surface or ground installation accessories to be ordered separately.
Each luminaire is equipped with 1000 mm lenght outgoing cable and a wiring kit.
Schematic light drawing
- Lamp category: LED
- Power (W): 11
- CCT (K): 2700K
- CRI: 80
- Net lumen (lm): 292
- Mountings: Ground
- Environment: Outdoor wet location
- Lighting type: Direct
- LED type: Power LED
- Light distribution: Asymmetric
- Optical type: Asymmetric
- Beam angle (°): 45
- Beam angle C90-270 (°): 20
- Frequency (Hz): 50-60
- Voltage (V): 220-240
- Dimmable: Yes
- Driver: Integrated
- Driver type: Dimmable 1-10V
- Emergency: Without
- Insulation class: II
- Color: Grey
- Orientation: Fixed
- Weight (kg): 1.95
Notes: During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
Fixing base for solid surfaces Grey
- Item Code: F002Z010006.A
Fixing base for solid surfaces White
- Item Code: F002Z010001.A
Klein Pro base plate and fixing bolts 85x85xH160 mm
- Item Code: F002Z020000
Minimal Klein Pro ground fixation plate, 47x57xH160 mm
- Item Code: F002Z030000.A
Anodized aestetical pole screen Anodized Black
- Item Code: F002Z050071
Anodized aestetical pole screen Anodized Gold
- Item Code: F002Z050073
Fixing base for solid surfaces Anthracite
- Item Code: F002Z010033.A
Anodized aestetical pole screen Anodized Natural
- Item Code: F002Z050070
Fixing base for solid surfaces Black
- Item Code: F002Z010030.A
Fixing base for solid surfaces Deep Brown
- Item Code: F002Z010018.A