Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
klein-pro-h900_oxide_black-1950×1950-17
HyperFocal: 0
HyperFocal: 0
Klein-Pro-Bollard-Thierthierry-Dreyfusry-Flos-Outdoor-C-thumb-03
HyperFocal: 0
HyperFocal: 0
Klein-Pro-Bollard-Thierthierry-Dreyfusry-Flos-Outdoor-C-thumb-06

Klein Pro H 900 mm Dimmable 1-10V Anodized Black

LED - 2700K - CRI 80 - BEAM 45

Item Code: F002B21B071.A

The body of Klein Pro bollard is made of extruded aluminium, base and diffuser in die-cast aluminium EN AB-47100 with a low copper content.
High-resistance coating: the external coating is applied with a double layer with epoxy powders according to the QUALICOAT standard. The first layer of epoxy powder gives chemical and mechanical resistance, the second finishing layer of polyester powder ensures resistance.
Also available in anodized finishes.
Klein Pro is compatible with existing “Klein” fixing plate.
220-240V power supply integrated. Solid surface or ground installation accessories to be ordered separately.
Each luminaire is equipped with 1000 mm lenght outgoing cable and a wiring kit.

Also available in: Klein Pro
Technical drawing
Schematic light drawing
Asymmetric
  • Y
  • EXTIP10
  • IK07
  • CM10
  • OTYPE10
  • IC2
Main specifications
  • Lamp category: LED
  • Power (W): 11
  • CCT (K): 2700K
  • CRI: 80
  • Net lumen (lm): 292
  • Mountings: Ground
  • Environment: Outdoor wet location
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Asymmetric
  • Optical type: Asymmetric
  • Beam angle (°): 45
  • Beam angle C90-270 (°): 20
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 220-240
  • Dimmable: Yes
  • Driver: Integrated
  • Driver type: Dimmable 1-10V
  • Emergency: Without
  • Insulation class: II
Physical
  • Color: Anodized Black
  • Orientation: Fixed
  • Weight (kg): 1.95
Notes

Carefully install and maintain the fixtures to avoid damaging the coating. For LED fixtures, most problems are tied to electrical issues related to the insulation, which may cause destructive electrical discharges. These are frequently caused by: • power surges from the power network where fixture is connected. • electrostatic discharge (ESD) from the environment. We recommend installing a power-surge protection device on the fixture to reduce the intensity of these effects and prevent irreversible damages. The specific device should be chosen based on the electrical characteristics.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment