No spam, just the best from the world of Flos and design, we promise.

Filter by designers
Filter by families

Colors (6)

Flauta Spiga 3 Dimmable DALI

LED - 3000K - CRI 80 - BEAM 16

New Item Code: F019B33D001

Collection of outdoor wall-mounted light fittings with dual light emission, available in various lengths.
The units are characterised by the surface etching in two refined variations: Flauta Riga, with vertical lines, and Fluta Spiga, characterized by an elegant and sophisticated angular pattern.
Rounding out the device is a deflector accessory painted to match the finish of the lamp body. It can be installed as desired on the upper or lower head to create a decorative effect with reflected light.
The structure is made of aluminium treated with a chemical conversion process for effective resistance to atmospheric agents. The powder coating of the body is available in various finishes according to the QUALICOAT standard. The first layer of epoxy powder confers chemical and mechanical resistance. The second layer, a polyester powder finish, ensures resistance to UV rays and corrosive atmospheric agents. The painted surfaces are treated with alkiline and acid washes, rinsed with demineralised water, and subjected to chemical conversion treatment to protect against rust.
Diffuser in transparent glass, sealed to guarantee water resistance.
Integrated LED light source. Driver integrated in the body of the unit for DALI dimmer control.
LED light source included. Integrated 220-240V electrical power with DALI dimmer. Comes with deflector for optional installation on the upper or lower head.
110V version upon request.

Also available in: Flauta
Technical drawing
Schematic light drawing
  • Y
  • EXTIP6
  • IK04
  • CM10
  • OTYPE5
  • IC2
Main specifications
  • Lamp category: LED
  • Power (W): 12
  • CCT (K): 3000K
  • CRI: 80
  • Net lumen (lm): 2x372
  • Mountings: Wall
  • Environment: Outdoor wet location
  • Lighting type: Indirect, Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Medium
  • Beam angle (°): 16
  • Beam angle C90-270 (°): 16
  • Beam angle ind (°): 16
  • Beam angle ind C90-270 (°): 16
  • Frequency (Hz): 50-60
  • Voltage (V): 220-240
  • Dimmable: Yes
  • Driver: Integrated
  • Driver type: Dimmable DALI 1
  • Emergency: Without
  • Insulation class: II
  • Color: White
  • Orientation: Fixed
  • Weight (kg): 2.6

We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over Voltage coming from the Mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant. 110V version available by request.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment