No spam, just the best from the world of Flos and design, we promise.

Filter by designers
Filter by families
HyperFocal: 0

Colors (6)

Belvedere Clove 2 Dali Forest Green

LED - 4000K - CRI 80 - BEAM 100

Item Code: F001B41D012

Family of outdoor products consisting of luminaires with a pole of two different heights and suitable for floor installations (ground or buried) and with integrated power supply box.
220-240V power supply included. Ready for installation on solid surface. Box for ground installation to be ordered separately.
Included 2 way terminal block 4 poles IP68 H2O Stop.
Version 110V upon request.

Also available in: Belvedere
Technical drawing
Schematic light drawing
Diffused light
  • Y
  • EXTIP6
  • IK08
  • CM10
  • OTYPE1
  • IC2
Main specifications
  • Lamp category: LED
  • Power (W): 8.40
  • CCT (K): 4000K
  • CRI: 80
  • Net lumen (lm): 703
  • Mountings: Ground
  • Environment: Outdoor wet location
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Diffused light
  • Beam angle (°): 100
  • Beam angle C90-270 (°): 100
  • Frequency (Hz): 50-60
  • Dimmable: Yes
  • Driver: Integrated
  • Driver type: Dimmable DALI 1
  • Emergency: Without
  • Insulation class: II
  • Color: Forest Green
  • Orientation: Fixed
  • Weight (kg): 2.10

We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment