No spam, just the best from the world of Flos and design, we promise.

Filter by designers
Filter by families

Colors (7)

Bellhop Bollard H 380 mm Dimmable 1-10V

LED - 2700K - CRI 80 - BEAM 85

Item Code: F003A21B018

Bollard version of the Bellhop Outdoor Collection for diffuse light. Made of extruded and die-cast aluminium or stainless steel, Bellhop is available in two heights for the bollard model and with different lumens and luminaire outputs as to comply with any outdoor setting and lighting scenario need.
100-240V power supply included. Ready for installation on solid surface.
Each luminaire is equipped with 200 mm cable for connection inside the luminaire body.
Reccomended connection wit a 2 way terminal block 4 poles IP68 H2O Stop, to be ordered separately.

Also available in: Bellhop
Technical drawing
Schematic light drawing
Diffused light
  • Y
  • EXTIP6
  • IK10
  • CM10
  • OTYPE1
  • IC1
Main specifications
  • Lamp category: LED
  • Power (W): 8.00
  • CCT (K): 2700K
  • CRI: 80
  • Net lumen (lm): 551
  • Mountings: Ground
  • Environment: Outdoor wet location
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Diffused light
  • Beam angle (°): 85
  • Beam angle C90-270 (°): 85
  • Frequency (Hz): 50-60
  • Voltage (V): 220-240
  • Dimmable: Yes
  • Driver: Integrated
  • Driver type: Dimmable 1-10V
  • Emergency: Without
  • Insulation class: I
  • Color: Deep Brown
  • Orientation: Fixed
  • Weight (kg): 1.20

During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment