Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
around_315_brushed_bronze-1950X1950
HyperFocal: 0
HyperFocal: 0
HyperFocal: 0
HyperFocal: 0
A-Round-in-ground-Piero-Lissoni-Flos-Outdoor-C-thumb-05

Colors (2)

A-Round 315 Dimmable 1-10V Satin Bronze

LED - 4000K - CRI 80 - BEAM 64

Item Code: F4596046-310

Ground-recessed luminaire for outdoor use, walkable and trafficable, available in three sizes, with adjustable optics in various configurations.
External body made of stainless steel AISI 316L treated with the PVD process (Physical Vapour Deposition).
Thanks to this innovative treatment, the surfaces of A-Round are coated with a thin film of metals, such as zirconium and titanium which, combining with the steel at the molecular level, increases the resistance to both, mechanical and atmospheric agents, permitting the execution of elegant and durable finishings.
The body of the luminaire is made of die-cast aluminum EN AB-47100 with low copper content, coated with two layers of paint with high resistance to corrosion.
High-strength tempered clear glass, screen-printed to reduce glare.
Driver for remote installation included, provided with M12 quick connector for watertight coupling.
Installation requires a housing for flush mounting, to be ordered separately.
It is necessary to provide an adequate level of gravel (> 300 mm) or a drain system to ensure drainage and avoid water stagnation. To ensure the sealing of the cable gland it is necessary to use flexible electric cables suitable for use in outdoor environments.
Integrated 220/240V power supply. Box for installation required, to be ordered separately.
Adjustment on the horizontal axis: max 15°. Rotation around the vertical axis: max 359°.

Also available in: A-Round
Technical drawing
Schematic light drawing
Flood down
  • Y
  • EXTIP7
  • IK10
  • CM10
  • OTYPE15
  • IC2
Main specifications
  • Lamp category: LED
  • Power (W): 42
  • CCT (K): 4000K
  • CRI: 80
  • Net lumen (lm): 2788
  • Mountings: Ground recessed
  • Environment: Outdoor wet location
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Flood down
  • Beam angle (°): 64
  • Beam angle C90-270 (°): 64
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 220-240
  • Dimmable: Yes
  • Driver: Remote included
  • Driver type: Dimmable 1-10V
  • Emergency: Without
  • Insulation class: II
Physical
  • Color: Satin Bronze
  • Orientation: Adjustable
  • Rotation (°): 359
Notes

We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Are you a professional? I'd be happy to help you find a lighting solution!

Book an appointment